Vacuum injection equipment
For the vacuum injection process to be successful, it is important to work with high-quality material. Romar-Voss Composites' product range includes several tools that will make this process trouble-free.

Perforated release film
Polypropylene (PP)
Thickness: 25 µm
Suitable for processing at low temperatures
Temperature resistance: 120°C
Available widths: 100 & 150 cm

Vacuum film FLM 120
Nylon/polyolefin co-extrusion
Thickness: 75 µm
Limited sensitivity to low moisture levels
Temperature resistance: 120°C
Available widths: 150 - 1200 cm

Vacuum film FLM 170
Nylon/polyolefin co-extrusion
Thickness: 50 µm
Suitable for oven and autoclave techniques
Temperature resistance: 170°C
Available widths: 240, 260 & 320 cm

Tubular film TBL 170
Nylon/polyeolefin co-extrusion
Half circumference: 8,6 - 220 cm
Available in self-releasing and non-self-releasing variants
Temperature resistance: 170°C
Available thicknesses: 50 & 75 μm

Self-releasing tubular film TBLAD 170
Nylon/polyeolefin co-extrusion
Half circumference: 8.6 - 80 cm
Self-releasing, making this film suitable for hollow spaces in oven and autoclave techniques.
Temperature resistance: 170°C
Available thicknesses: 70 μm

Bleeder
Non-woven polyester veil
150 g/m²
Used as absorption veil in vacuum techniques

Tear-off fabric / Peelply
For creating a roughened surface to provide improved adhesion when bonding.

Compoflex
48% PP combined with 52% HDPE
Easy lay-up with only one product.
Peelply, release liner and flow medium in one.
Is suitable for processing with polyester, vinyl ester and epoxy resins, among others.
Temperature resistance: 200°C

Tacky tapes
Double-sided tape
High adhesive strength
For an airtight seal of vacuum film on mould or substrate
Temperature-resistant grey tape: 140°C
Temperature resistant yellow tape for autoclave techniques: 210°C

Spiral hose
HDPE
Ø 12 mm
For distributing injection resin during the vacuum process

PE hose
Polyethylene (PE)
Ø 10 mm
For distributing injection resin during the vacuum process

Vacuum connector
For connecting vacuum hoses during the vacuum process
Available in I, T & L variants

Vacuum tap
For closing the hose during the vacuum process
For opening and closing the resin supply

Vacuum valve
For pinching the hose during the vacuum process

Flash tapes
For securing vacuum materials under the vacuum bag
Leaves no residue upon removal
Temperature-resistant: 180°C

MTI vacuum hose
Vacuum hose encased with special membrane
For bubble-free injection
Suitable for epoxy & polyester resins